Non-profit Joint Stock Company “Kostanay Regional University named after Akhmet Baitursynuly,” in accordance with Clause 7 of the Rules on the procurement of goods, works, and services by research institutes and organizations of higher and/or postgraduate education necessary for conducting scientific research and studies funded by the state budget, approved by the Order of the Minister of Science and Higher Education of the Republic of Kazakhstan dated November 26, 2024, No. 538, within the framework of the research project IRN BR24992785 “Organization and Implementation of Comprehensive Research to Ensure the Sustainable Development of the Agro-Industrial Complex of Kostanay Region with the Establishment of a Scientific and Technological Research Center,” announces a tender for the purchase of equipment for conducting scientific research.
Contact details: +7(777)367-46-33 – on technical specifications; +7 (7142) 51-11-05 – on procurement procedure.
Please submit commercial proposals by 12:00 on December 25, 2025, by email to: zakup@ksu.edu.kz or in person at: Kostanay, Baitursynov Street 47, office 314 (main building).
Technical characteristics of the purchased goods:
|
№ |
Name, description |
Quantity, pcs |
Planned price, tenge |
Planned cost, tenge |
|
|
1 |
A platform for virtual smart devices. The device includes 14 measuring and analytical instruments: an oscilloscope with a voltage range of 25 V, an arbitrary waveform generator with 2 channels with a frequency of 12 MHz, a digital input/ output module, a programmable power supply, a network analyzer and Bode diagrams with a frequency range from 0.01 Hz to 2 MHz, a frequency step from 5 to 1 kHz, a logic the analyzer has a buffer depth of 4 thousand, a digital template generator of 16 channels with a refresh rate of 40 MSPS, a spectrum analyzer, a data logger, an impedance analyzer with a frequency range from 1 Hz to 5 MHz, a frequency step from 1 to 10001, signal tracer, voltmeter, digital multimeter, protocol analyzer. |
2 |
595 620 |
1 191 240 |
|
|
2 |
The laboratory table is made of 1.0mm thick steel with epoxy powder coating, hardened at high temperature. The structure is collapsible, the door is built into the frame. It is equipped with metal cabinets with a thickness of 0.8 mm: double 800-1000 mm wide and single 400-500 mm wide. The handle and the front panel are made of a solid construction with a built-in handle. Drawer guides are ball-shaped, three-section. The base is made of nylon with an 8 mm diameter screw, resistant to corrosion and moisture. The table top is made of Trespa TopLab Plus with a thickness of 12.7 mm and an edge height of 25 mm. Overall dimensions are 5000×1500×900 mm. |
1 |
2 484 568,75 |
2 484 568,75 |
|
|
3 |
The laboratory table is made of 1.0mm thick steel with epoxy powder coating, hardened at high temperature. The structure is collapsible, the door is built into the frame. It is equipped with metal cabinets with a thickness of 0.8 mm: double 800-1000 mm wide and single 400-500 mm wide. The handle and the front panel are made of a solid construction with a built-in handle. Drawer guides are ball-shaped, three-section. The base is made of nylon with an 8 mm diameter screw, resistant to corrosion and moisture. The table top is made of Trespa TopLab Plus with a thickness of 12.7 mm and an edge height of 25 mm. Overall dimensions are 3500×750×900 mm. |
1 |
1 234 562,5 |
1 234 562,50т |
|
|
4 |
The laboratory table is made of 1.0mm thick steel with epoxy powder coating, hardened at high temperature. The structure is collapsible, the door is built into the frame. It is equipped with metal cabinets with a thickness of 0.8 mm: double 800-1000 mm wide and single 400-500 mm wide. The handle and the front panel are made of a solid construction with a built-in handle. Drawer guides are ball-shaped, three-section. The base is made of nylon with an 8 mm diameter screw, resistant to corrosion and moisture. The table top is made of Trespa TopLab Plus with a thickness of 12.7 mm and an edge height of 25 mm. Overall dimensions are 1600×750×900 mm. |
4 |
557 362,5 |
2 229 450 |
|
|
5 |
The laboratory table is made of 1.0mm thick steel with epoxy powder coating, hardened at high temperature. The structure is collapsible, the door is built into the frame. It is equipped with metal cabinets with a thickness of 0.8 mm: double 800-1000 mm wide and single 400-500 mm wide. The handle and the front panel are made of a solid construction with a built-in handle. Drawer guides are ball-shaped, three-section. The base is made of nylon with an 8 mm diameter screw, resistant to corrosion and moisture. The table top is made of Trespa TopLab Plus with a thickness of 12.7 mm and an edge height of 25 mm. Overall dimensions are 3300×750×900 mm. |
1 |
1 121 925 |
1 121 925 |
|
|
6 |
The laboratory table is made of 1.0mm thick steel with epoxy powder coating, hardened at high temperature. The structure is collapsible, the door is built into the frame. It is equipped with metal cabinets with a thickness of 0.8 mm: double 800-1000 mm wide and single 400-500 mm wide. The handle and the front panel are made of a solid construction with a built-in handle. Drawer guides are ball-shaped, three-section. The base is made of nylon with an 8 mm diameter screw, resistant to corrosion and moisture. The table top is made of Trespa TopLab Plus with a thickness of 12.7 mm and an edge height of 25 mm. Overall dimensions are 3000×750×900 mm. |
1 |
747 311,25 |
747 311,25 |
|
|
7 |
The laboratory table is made of 1.0mm thick steel with epoxy powder coating, hardened at high temperature. The structure is collapsible, the door is built into the frame. It is equipped with metal cabinets with a thickness of 0.8 mm: double 800-1000 mm wide and single 400-500 mm wide. The handle and the front panel are made of a solid construction with a built-in handle. Drawer guides are ball-shaped, three-section. The base is made of nylon with an 8 mm diameter screw, resistant to corrosion and moisture. The table top is made of Trespa TopLab Plus with a thickness of 12.7 mm and an edge height of 25 mm. Overall dimensions are 3500×1500×900 mm. |
1 |
2 306 725 |
2 306 725 |
|
|
8 |
The laboratory table is made of 1.0mm thick steel with epoxy powder coating, hardened at high temperature. The structure is collapsible, the door is built into the frame. It is equipped with metal cabinets with a thickness of 0.8 mm: double 800-1000 mm wide and single 400-500 mm wide. The handle and the front panel are made of a solid construction with a built-in handle. Drawer guides are ball-shaped, three-section. The base is made of nylon with an 8 mm diameter screw, resistant to corrosion and moisture. The table top is made of Trespa TopLab Plus with a thickness of 12.7 mm and an edge height of 25 mm. Overall dimensions 900×750×900 mm. |
2 |
487 200 |
974 400 |
|
|
9 |
The laboratory table is made of 1.0mm thick steel with epoxy powder coating, hardened at high temperature. The structure is collapsible, the door is built into the frame. It is equipped with metal cabinets with a thickness of 0.8 mm: double 800-1000 mm wide and single 400-500 mm wide. The handle and the front panel are made of a solid construction with a built-in handle. Drawer guides are ball-shaped, three-section. The base is made of nylon with an 8 mm diameter screw, resistant to corrosion and moisture. The table top is made of Trespa TopLab Plus with a thickness of 12.7 mm and an edge height of 25 mm. Overall dimensions are 1200×750×900 mm. |
2 |
580 741,88 |
1 161 483,75 |
|
|
10 |
The laboratory table is made of 1.0mm thick steel with epoxy powder coating, hardened at high temperature. The structure is collapsible, the door is built into the frame. It is equipped with metal cabinets with a thickness of 0.8 mm: double 800-1000 mm wide and single 400-500 mm wide. The handle and the front panel are made of a solid construction with a built-in handle. Drawer guides are ball-shaped, three-section. The base is made of nylon with an 8 mm diameter screw, resistant to corrosion and moisture. The table top is made of Trespa TopLab Plus with a thickness of 12.7 mm and an edge height of 25 mm. Overall dimensions are 2100×750×900 mm. |
2 |
862 187,5 |
1 724 375 |
|
|
11 |
The laboratory table is made of 1.0mm thick steel with epoxy powder coating, hardened at high temperature. The structure is collapsible, the door is built into the frame. It is equipped with metal cabinets with a thickness of 0.8 mm: double 800-1000 mm wide and single 400-500 mm wide. The handle and the front panel are made of a solid construction with a built-in handle. Drawer guides are ball-shaped, three-section. The base is made of nylon with an 8 mm diameter screw, resistant to corrosion and moisture. The table top is made of Trespa TopLab Plus with a thickness of 12.7 mm and an edge height of 25 mm. Overall dimensions are 2600×1500×900 mm. |
1 |
1 993 200 |
1 993 200 |
|
|
12 |
The laboratory table is made of 1.0mm thick steel with epoxy powder coating, hardened at high temperature. The structure is collapsible, the door is built into the frame. It is equipped with metal cabinets with a thickness of 0.8 mm: double 800-1000 mm wide and single 400-500 mm wide. The handle and the front panel are made of a solid construction with a built-in handle. Drawer guides are ball-shaped, three-section. The base is made of nylon with an 8 mm diameter screw, resistant to corrosion and moisture. The table top is made of Trespa TopLab Plus with a thickness of 12.7 mm and an edge height of 25 mm. Overall dimensions are 2400×750×900 mm. |
1 |
997 075 |
997 075 |
|
|
13 |
The laboratory fume hood is made of cold-rolled steel 1.0 mm thick and coated with epoxy powder paint with heat hardening. The design is combined: the upper cabinet is 1650 mm high, the lower one is 700 mm. The front of the side panels, the upper cladding panel and the deflector have a curved shape to evenly distribute the airflow. It is equipped with a three-section deflector. The inner lining and deflector are made of 5 mm thick antistatic plate. The working area is equipped with a lifting glass with a sliding mechanism (stroke 5 mm), the maximum opening height is 800 mm. The working surface is made of a physico-chemical plate with a 12.7 mm thick solid core. Overall dimensions are 2000×850×2350 mm (W×D×H). |
4 |
3 359 840 |
13 439 360 |
|
|
14 |
Specialized suspension system. Overall dimensions of the product: W 3000 × D 400 × H 1500 mm. It is made of cold-rolled steel with a thickness of 1.0 mm, the surface is coated with epoxy powder paint and cured at high temperature by electrostatic spraying. It is equipped with two shelves made of tempered glass with a thickness of 8 mm. |
2 |
2 112 187,5 |
4 224 375 |
|
|
|
Total including VAT |
|
|
35 830 051,25 |
|
Delivery time is no more than 7 calendar days. The supplier is obliged to carry out the commissioning of furniture and fume hoods within the time limits agreed with the customer.